Xtool X100 PAD3 + Yanhua FEM/BDC Clip Read BMW 95128 No Solder

Yanhua FEM/BDC Special Programming Clip can read 95128/95256 chip without soldering. Compatible with most diagnostic tools on market such as ACDP, CGDI, VVDI, Autel, Launch X431, Xtool, etc.

Here's a quick demo on how to read 95128 with Xtool X100 PAD3.

Check full operation on Youtube:

1.Install Yanhua FEM/BDC Clip.

How to install Yanhua FEM/BDC Clip?

2.Connect to EEPROM Adapter & X100 PAD3.

Special function >> EEPROM >> EEPROM Adapter

Please make sure to connect to VCI & turn on the ignition switch...

Read/write EEPROM >> EEPROM adapter 

Make sure the adapter is connected and powered on, and the status light is turned on.

95CXX series >> 95128 >> Read EEPROM data >> Save file

Read completely!

This is how to read BMW 95128 chip with Yanhua FEM/BDC Clip without disassembly.

http://blog.obd2shop.co.uk/xtool-x100-pad3-yanhua-fem-bdc-clip-read-bmw-95128-no-solder/

XTOOL X100 PAD3 Program 2015-2020 Ford Lincoln AKL Instructions

This is an instruction on how to program 2015-2020 Ford Lincoln all keys lost alarm active situations with XTOOL X100 PAD3.

Tools You Need

XTOOL X100 PAD3(X100 PAD ELITE)

Main cable & OBD2-16 connector

Ford AKL Alarm Bypass Cable

Wi-Fi connection

How to Connect?

1. Connect the main cable (with OBD2 connector plugged) to the female OBD2 socket of the Ford cable, and connect the tablet(or VCI box, if it has one) to the other side of the main cable.

2. Connect the male OBD2 socket of the Ford cable to the OBD port of the vehicle.

3. Take the battery clip off from the car’s battery and connect the 2 battery clips(with the “Battery +/-” tag on it) to the battery.

4. There is also a battery clip(red cable with “Battery Clip +” tag on it) on the cable. Connect it to the positive battery clip on the car.

How It Works?

Ford AKL Alarm Bypass Cable can:

1. Allows you to perform Ford smart key all keys lost via XTOOL devices with a VCI box(H6Pros, A80Pros, X100MAXs, etc.)

2. Optimize the process on Ford smart key all keys lost via XTOOL devices without a VCI box(X100 PAD series, H6 Elites, D7/D8, etc.)

3. Controls vehicle battery on/off with a switch on your hand and save your time from the repeating battery reconnecting process.

Operation Process

Here we take a 2018 Ford Edge with an active alarm as an example and read its EEPROM data without any keys available.

1. Make sure the cable is connected properly, then select the following menus on the tablet to get into this function.

Ford (V27.30 or higher) > North American Ford > Smart key system > Edge > 2016-2020

And this menu will show up.

2. Select “All keys lost”. Then choose the menu depending on the status of the vehicle. Considering the alarm is on now, here we select “Alarm activation”.

3. Now open the door on the driver’s side. Use a screwdriver to jam the door latch on the locked position(but keep it opening). The door should keep opened but locked until the entire process is done. When it’s done, click “OK” to continue.

4. Select “Reading EEPROM” first.

5. If the cable is connected, switch off the battery.

6. The device will try to read the EEPROM by communicating with the ECU. When this notice shows up, switch on the battery and check it the alarm still goes on.

7. If the alarm is still on, switch off the battery and wait for 10s, then try switch off and on again.

8. If the alarm is off, disconnect the cable to the battery, connect it back to the battery clip of the car, tighten it, and close the hood. Click “OK” to continue.

9. Reading EEPROM data. This normally will take 10 minutes, please wait patiently.

10. When the EEPROM reading is done, it will generate a bin file. Input the file name and save it on the Internet Storage/ Adapter folder.

* if you’re using a device without VCI but not using the cable, you must remove/install the battery clip every time the device noted you to disconnect/ reconnect the battery.

More questions welcome to contact us.

www.obd2shop.co.uk

Xtool M821 Adapter: Designed for Mercedes Benz All Key Lost

Xtool M821 Adapter is newly coming soon. Designed to program Mercedes Benz all key lost. Should work with XTOOL X100 PAD3 or X100 Max &KC501 Key Programmer together. To improve 65% efficiency, no need to plug or unplug hundreds of times.

Note: Please first update your Mercedes Benz key programming software to the latest version 27.10.

Xtool M821 Mercedes-Benz Car List Supported:

Year	ELS NO.	Chassis NO.	Models
2006-2011	W164	W164	GL-Class
			ML-Class
2009+		W251	R-Class
2011-2015	W166	W166	GL-Class
			ML-Class
2007-2009	W204	W204	C-Class
2009			GLK-Class
2003-2009	W211	W211	E-Class
2004-2010		W171	SLK-Class
2006-2010		W219	CLS-Class
2010-2014	W212(NEW)	W212	E-Class
2013-2015		W204	GLK-Class
2012		W251	R-Class
2012-2014		W172	SLK-Class
2018-2022	W216	W221	S-Class
	W221	W221	S-Class

What is in the Xtool M821 package?

M821 Mercedes Benz AKL adapter 

J1K02_BENZ_Wiring Harness

Quick Guide

How to connect M821 Communication Adapter?

1. Connect Xtool device & KC501 via USB;

2. Connect Mercedes Benz IR emulator with KC501;

3. Disconnect OBD2 connector from the main cable, connect Xtool device(or VCI box) with M821 Adapter by main cable;

4. Use 12V power supply to main cable;

5. Connect EIS/EZS module with M821 Adapter by J1K02_BENZ_cable.

Note: 

*Please check wiring diagram in Xtool device when connecting M821 Adapter & EIS/EZS module via J1K02_BENZ_cable.

*The Mercedes Benz IR emulator should insert into the slot of the module when operating.

*For device with a VCI box, connect 821 Adapter with VCI box by main cable, keep VCI box connected with the device via Bluetooth. More details can check in device when connection.

More questions welcome to contact us.

www.obd2shop.co.uk

What Tools Recommended to Program Hyundai Creta Key?

Both XTOOL X100 PAD3&Xhorse VVDI MINI OBD Tool are able to successfully program Hyundai Creta via OBD with ease. Among them, X100 PAD3 covers a wider range of car models while VVDI MINI OBD Tool is much affordable. 

However, below we’re showing the Hyundai Creta key programming procedure for reference. Including password reading & key learning.

Program Hyundai Creta smart key via XTOOL X100 PAD3

Plug XTOOL X100 Elite cable into OBD2 port, press

Diagnosis >> HYUNDAI >> Agree >> Security/ Authorization code >> 8A authorization code(smart card)

Scanner has to be connected to Internet to complete the operation.

Switch ignition OFF.

Security code has read out. It’s 479342.

Program immobiliser/ remote >> Select from type >> Smart key system >> General >> Type 6(without card slot)

Press START button.

Press “Program smart keys”.

Turn off the ignition switch.

Input the security code.

Put smart key vertically close to the START button, and press START button.

Program success.

Press “Yes” to continue, press “No” to complete.

Test the keys, all are workable.

Done.

Program Hyundai Creta(-2007) AKL via Xhorse MINI OBD Tool

Xhorse VVDI MINI OBD Tool can program Hyundai Creta(-2007) when all keys lost.

Plug VVDI MINI OBD Tool into OBD, press

Immo programming >> Hyundai >> Read pin code >> Before 2007 model use(6 bit) >> Start execution

Turn on the ignition switch.

Continue to test the password read currently? No

Passwords have been read out successfully.

Password1: 764525, password2: 493258

Immo programming >> Hyundai >> Select by type >> Key programming >> type4(CAN) >> Start execution >> Key programming

Switch ignition off, then ON.

Or press double flash button once to make sure the system is activated.

The number of learned keys: 1

Press “Yes” to continue.

Input password: 764525

Whether to learn the key? Yes

Insert the key to be learned and switch ignition to ON.

The key has successfully learned.

Test the key.

It can normally start the car.

Done!

Whatever it is XTOOL X100 PAD3 or XhorseMINI OBD Tool key programmer, just select the one according to your needs.

http://blog.obd2shop.co.uk/what-tools-recommended-to-program-hyundai-creta-key/